Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Dryer Vent Cleaning Across Spokane
If your dryer takes two cycles to dry a load, or the laundry room smells faintly of warm lint, the vent run is usually the reason. We handle dryer vent cleaning in Spokane for homeowners who want the job done properly the first time, and we know the housing here well enough to expect surprises behind the drywall. Much of Spokane’s stock dates to the early-to-mid 20th century, and those homes have vent runs that were never designed for a modern dryer’s airflow. We bring professional-grade Rotobrush and Nikro equipment and a camera, because in Spokane a vent clean often turns into a crushed-run repair. Call (844) 352-9945. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Spokane Homeowners Call Lockhart Air Duct Cleaning for Dryer Vent Cleaning
We’ve built a reputation in Spokane on the unglamorous part: opening up a vent run, showing the homeowner what’s inside, and explaining what needs fixing before anyone picks up a tool. Our customers tend to be people who’ve already been burned by a cheap coupon job and want to know the work actually happened. That’s why we run before-and-after photos of your own vent run and agree one flat price per system before we start.
Response to Spokane is straightforward. We’re based in Spokane Valley, so getting to the South Hill, the north side, or out toward Browne’s Addition doesn’t eat the day. Call and we’ll book you into the next opening, Sunday through Friday, 7am to 7pm. Same-day service is often possible when the schedule allows.
The local knowledge matters more than people expect. We know which Spokane neighborhoods still have original sheet-metal vent runs and which subdivisions were built with flexible ducting that sags between joists. That shapes how we approach each house, and it’s why we inspect before we clean.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Dryer Vent Cleaning Company in Spokane
Choosing a dryer vent cleaning company in Spokane should come down to equipment and honesty, not the lowest advertised number. The job itself means pulling the dryer out, isolating the run, running rod agitation through the full length, capturing everything under negative pressure with HEPA filtration, and confirming airflow at the exterior termination. A trap-side brush-out is not a vent cleaning. If you’ve noticed longer dry times, a hot dryer cabinet, or lint collecting around the outside hood, it’s time. Typical dryer vent cleaning in Spokane runs $150 to $280 for a standard single-story run, and $220 to $380 where the run is long, vertical, or routed through a finished basement.
What the Work Actually Involves
We start by disconnecting the dryer and inspecting the transition, because that’s where most failures hide. Rod agitation breaks loose material the brush alone skips, and the vacuum captures it rather than pushing it into the room. Then we check the exterior termination for a functioning damper and clear airflow before we call it done.
When to Book It
Once a year is a reasonable baseline for most Spokane households, and more often if you have pets or a long run. If your dryer has started taking noticeably longer, book it sooner rather than later. Lint accumulation in a vent run is a documented fire risk, and that’s the reason we treat this as a safety service rather than a cosmetic one.
Dryer Vent Inspection in Spokane
A dryer vent inspection in Spokane is the camera-and-airflow check that tells you whether the run is clear, connected, and safe, and it’s the step that separates a real vent service from a surface clean. We feed a camera through the lint pathway, measure airflow at the termination, and check the transition behind the dryer. If the run is crushed, disconnected, or dumping lint into a wall cavity, you’ll see it on the screen. Inspection alone typically runs $95 to $160. When it’s bundled with a cleaning, the inspection is usually included.
What the Camera Finds
Older Spokane homes frequently have runs that were rerouted around a furnace conversion or squeezed behind a cabinet, and the crush point is often invisible from either end. The camera finds it in minutes.
Reading the Results
We show you the footage and explain what each finding means for airflow and safety. You get the diagnosis before any repair work is quoted, and the written estimate sets the final price.
Trusted Brands We Service in Spokane
We stock parts locally for Spokane customers, so a vent cap, bird guard, or transition fitting doesn’t turn into a two-week wait. We work with Aprilaire and Abatement Technologies filtration and capture products, and we run Rotobrush equipment on every vent job because it’s the same professional-grade gear commercial contractors rely on. Vent caps and bird guards we source from Guardsman where the fit calls for it. If your vent run needs a proper rigid re-run rather than a patch, we do that too. Fast turnaround, one company, no loose ends.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Spokane Homes
- Crushed vent runs inside converted gravity-furnace chases. Original South Hill and north-side homes frequently hide a vent run squeezed or disconnected inside the old furnace chase, so lint dumps into wall cavities instead of reaching outside. No trap-side cleaning fixes that.
- Loess silt and volcanic ash cemented to the duct interior. Spokane’s dry summers coat everything in glacial loess dust and ash, and it binds with lint into a hard layer on older sheet-metal runs. Only agitation tools plus negative pressure break it loose.
- Sagging flexible ducting in newer subdivisions. Valley and far-north homes often have flex runs that dip between joists and trap lint in low pockets. A surface-only clean leaves it there, and a thermal camera picks it up immediately.
- Failed exterior dampers and open terminations. A stuck damper or missing cap lets birds, wasps, and weather into the run. We replace the cap and add a bird guard as part of the visit when needed.
Pricing for Dryer Vent Cleaning in Spokane, WA
We give you a real number, not a teaser. Standard dryer vent cleaning in Spokane typically runs $150 to $280 depending on run length and access. A camera inspection on its own runs $95 to $160. Where the run is crushed or disconnected and needs a rigid re-run, the repair adds roughly $200 to $550 depending on length and how much wall access is needed. Vent cap replacement and bird guard installation land in the $85 to $200 range. One flat price per system, agreed before work starts, no per-vent pricing, and before-and-after photos of your own ducts. The written estimate sets the final price. Call (844) 352-9945 for a free estimate.
We Also Serve Cities Near Spokane
We cover the neighborhoods and towns around Spokane too: Millwood, Spokane Valley, Green Bluff, and Four Lakes. If you’re just outside the city limits, the drive is short and the pricing doesn’t change. Same equipment, same inspection, same flat price per system. Call and we’ll get you on the schedule. You can also see our full dryer vent cleaning service details or read more about serving Spokane.
Serving Spokane, WA – Our Local Coverage Area
We serve Spokane and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Dryer Vent Cleaning in Spokane
Spokane’s dry summers lift glacial loess dust and volcanic ash into the air, and that silt gets pulled into your dryer’s intake along with lint. Unlike coastal lint, which stays fluffy, this mix packs and cements against the duct walls over time. That’s why a brush alone often isn’t enough here. Call (844) 352-9945 for an exact quote; estimates are free.
Yes, and it’s one of the most common things we find on the South Hill. When a gravity furnace was converted to forced air decades ago, the dryer vent was often squeezed or rerouted through the same chase. We camera-inspect before cleaning so we know whether the run is intact or crushed before we touch it.
An inspection is the diagnostic: camera through the run, airflow reading at the termination, and a look at the transition. A cleaning is the removal of the material. We do the inspection first because it’s how we know whether a cleaning will actually solve the problem or whether a repair is the real fix.
It shouldn’t, and when it does, it’s a problem. A dryer vent needs its own run to the exterior. Older Spokane homes sometimes have vent runs that were tapped into or routed alongside ductwork during a remodel, and that setup can dump lint where it doesn’t belong. We check for it on every inspection.
With agitation rods and negative pressure, not a brush. The packed loess silt and pet hair that builds up in older Spokane runs has to be broken loose mechanically and captured under HEPA filtration so it doesn’t end up back in your home. We show you the before-and-after footage so you know it came out.
Dryer vent cleaning in Spokane is a scheduled job, and a proper one takes an inspection, agitation, capture, and a check at the termination. If your run is crushed or your dryer is taking longer than it should, call (844) 352-9945 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by Sam Vega, Owner at Lockhart Air Duct Cleaning, serving Spokane since 2016.